Grounding page - Bosch Climate 7000i

Temperature control of individual living spaces

• Single-split system with one indoor unit and one outdoor unit for targeted temperature control of a single room.

• Suitable for cooling and heating, designed as an air-source heat pump.

• Nominal cooling capacities range from approximately 2.0 to 5.0 kW, depending on the unit configuration.

• Designed for various climate zones, with cooling operation typically ranging from approximately -15 °C to 50 °C and heating operation from approximately -30 °C to 30 °C, according to the manufacturer.

• Uses R32 refrigerant. R32 is a fluorinated gas with a moderate GWP value of 675.

Energy efficiency and energy management

• Energy efficiency class A+++ in cooling mode.

• Energy efficiency class A+++ in heating mode.

• According to the manufacturer, this is the first Bosch air conditioner with a SEER* greater than 10.

• Up to three energy management options are available to control energy use.

• The Power Control function allows you to limit power consumption to make electricity consumption more transparent and manageable.

• An integrated Human Sensor detects the presence of people in the room and, according to the manufacturer, automatically reduces the operating frequency if no movement is detected for more than approximately 30 minutes.

* SEER: Seasonal Energy Efficiency Ratio: The SEER describes the average cooling efficiency over an entire cooling season. It is calculated in accordance with EN 14825 based on multiple part-load points and varying temperature conditions, making it a more realistic measure of cooling efficiency over the course of a year than the COP or EER—even though it, too, is based on laboratory measurements. In the EU, the SEER is the decisive metric for determining the energy efficiency class for cooling operation.

Air quality and indoor hygiene

• Advanced ionizer technology generates negative ions in the room air.

• The i-Clean function uses a multi-stage process of freezing, thawing, and high-temperature treatment (for example, i-Clean at approximately 56°C) to clean the indoor unit's heat exchanger.

• This function aims to remove dust, mold, and grease from the heat exchanger and limit odor formation and bacterial growth.

• A multi-stage filter combination with a high-density filter, a cold catalyst filter, and a specific filter removes specific particles and substances from the room air, according to the manufacturer.

Comfort features and operating acoustics

• 3D Airflow/3D Swing enables airflow with vertical and horizontal movement of the air outlets to ensure the most even distribution of air throughout the treated room.

• The Wind-Avoid-Me function directs the airflow towards the ceiling to prevent drafts on people.

• The airflow direction can be precisely adjusted towards or away from people via remote control and app, allowing for easy adaptation to different usage situations.

• The Follow-Me function utilizes the temperature sensor in the remote control, enabling the system to adjust its settings based on the temperature in its vicinity.

• Silent or Sleep mode reduces operating noise, with the indoor unit achieving a sound pressure level of approximately 19–20 dB(A), according to the manufacturer, making it suitable for use in bedrooms and quiet rooms.

• The Human Sensor, Follow-Me function, and controllable airflow work together to allow for presence- and position-based adjustment of the system's operation.

Connectivity, control and easy integration

• The integrated Wi-Fi interface allows for easy integration into your home network without additional communication accessories.

• The Bosch HomeCom Easy app allows you to remotely switch the unit on and off, change operating modes, and adjust the target temperature.

• App support enables easy adjustment of the temperature, airflow, and other operating parameters without having to be directly at the indoor unit.

• Energy consumption and performance data can be monitored in the app; the display of efficiency values ​​and lifetime values ​​facilitates easy tracking of the operating profile.

• Integration into smart home ecosystems with voice control and integration into Matter-enabled networks is planned, resulting in easy integration into existing smart home infrastructures.

• This connectivity forms the basis for smart grid and energy monitoring functions, allowing you to observe load profiles and power output.

Design, variations and appearance

• The indoor unit follows a modern Bosch design language with soft shapes and a combination of glossy and matte surfaces.

• The design is intended to be unobtrusive and suitable for living spaces, complemented by a textile brand logo as a design element.

• The indoor unit is available in white, silver, and black, allowing it to be coordinated with various interior design styles.

• According to the product information, the design received a 2025 Design Award for its combination of aesthetics and functional execution.

Installation and service aspects

• The indoor unit is supplied with a metal frame and wall spacers to structure wall mounting and simplify installation for professionals.

• Extended connection pipes and lines offer greater flexibility in positioning the indoor and outdoor units, especially with thicker walls.

• Integrated connectivity supports professionals during commissioning, maintenance, and monitoring, as unit status and operating data are digitally accessible.

• Refrigerant leak detection with automatic shutdown is included to limit system operation in the event of a leak.

Eligibility and regulatory framework

• According to the manufacturer, the device meets the requirements for funding programs, including the German Federal Funding Program for Efficient Buildings (BEG).

• In conjunction with additional MSG-1 accessories, the requirements of the French RT2020 regulation can be addressed.

• For residents of apartments and single-family homes, the Climate 7000i addresses the need to selectively cool or heat individual rooms without altering the entire building system. The combination of heat pump technology and a single-split design enables temperature control focused on room usage.

• For users prioritizing energy cost control, the unit provides an objective basis for managing energy consumption, as efficiency indicators, energy management functions, power control, and a human sensor limit power draw and make it transparent in the app.

• For those sensitive to indoor air quality and hygiene, the Climate 7000i is ideal, as ionization, multi-stage filters, and the i-Clean function are designed to reduce particles, bacteria, and odor sources, according to the manufacturer.

• For tech-savvy households with smart home environments, the integrated Wi-Fi interface allows for easy integration into existing networks, enabling control, scheduling, and energy monitoring via app and voice assistant into existing routines.

• For users who need to limit noise sources in their living or sleeping areas, the quiet operation with Sleep and Silent modes provides a framework for combining air conditioning with low sound pressure levels, according to the manufacturer.

• For HVAC professionals, the Climate 7000i contributes to structured installation and service processes, as mounting aids, extended connections, and digital remote access make installation and diagnostics technically transparent and comparatively simple.

• For homeowners who wish to take advantage of subsidy programs, the unit serves as an option that, according to the manufacturer, meets relevant efficiency requirements of the German Energy Saving Ordinance (BEG) and certain international standards, and can therefore be integrated into eligible modernization projects.

• The Climate 7000i operates as a single-split air conditioner for a single room – not as a multi-split system for simultaneously supplying multiple rooms with one outdoor unit.

• The unit is an air-source heat pump for room air – not part of a water-based central heating system or underfloor heating system.

• The Climate 7000i functions as an end-user device for residential buildings – not as an industrial or large-scale climate control solution for halls or large commercial spaces.

• The integrated smart home connectivity supports energy monitoring and control – however, it does not replace a comprehensive energy management system for the entire building.

• The system supplements existing heating and cooling infrastructure in individual rooms – it is not a complete renovation package for the entire building services.